MeshCore Thailand
MeshCore in Thailand is starting in Phuket and on Koh Samui. One shared frequency profile is proposed for the whole country.
MeshCore region
th Proposed
th– Thailandth-phuket– Phuketth-surat-thani– Surat Thanith-bangkok– Bangkokth-chiang-mai– Chiang Maith-pattaya– Pattayath-hat-yai– Hat Yai
Regions keep messages local: repeaters only relay a scoped message if they know its region. Everyone in an area should use the same names – these are the names we propose.
Frequency profile
| Profile | Frequency | Bandwidth | SF | CR | Status |
|---|---|---|---|---|---|
| Thailand | 920.250 MHz | 62.5 kHz | SF8 | 4/5 | Proposed |
- Thailand: Proposed for all of Thailand, already in use in Phuket. Same values as the MeshCore preset “Vietnam (Narrow)”. Not yet verified against NBTC regulation. Source: api.meshcore.nz
You are responsible for complying with the radio regulations of your country. Information on this site is not legal advice.
Buying a device
- ✅Buy the 915 MHz version (often sold as “915 MHz”, “US915” or “AS923”).
- ❌Not 433 / 868 MHz – those versions cannot talk to the network here, and a device cannot be switched to another band.
- 💡Best choice: boards with an SX1262 radio and an accurate crystal (TCXO), e.g. T-Echo, Heltec V3/V4, RAK4631, SenseCAP. Older SX1276 boards work, but can drift in the heat with the narrow 62.5 kHz profile.
- 📡A good antenna made for 915 MHz matters more than the board. Never transmit without an antenna.
Map
Community
Your node appears automatically once it is uploaded to the MeshCore map or heard by one of our observers. Later you will be able to claim your node, add details and control its privacy. Questions? [email protected]
Community →