# meshcore-packet-capture – config for MeshCore Asia (https://meshcore.asia/docs/observers/) # # Install (not on PyPI yet – install from GitHub): # uv tool install git+https://github.com/agessaman/meshcore-packet-capture@v2.2.1 # # or: pipx install git+https://github.com/agessaman/meshcore-packet-capture@v2.2.1 # Living on the edge? Try @main – but fall back to @v2.2.1 before reporting issues. # Run: # meshcore-packet-capture --config meshcore-asia.toml --verbose # # With the system installer (install.sh) put this file in # /etc/meshcore-packet-capture/config.d/99-user.toml # # Login uses your radio's own key (token) – no account or password needed. # The software reads the key from the companion; it never leaves your machine. [general] iata = "HKT" # 3-letter airport code near you: HKT Phuket, USM Samui, BKK Bangkok, HAN Hanoi, SGN Ho Chi Minh City [capture] # Companion radio connection: "serial" (USB) or "ble" (Bluetooth) connection_type = "serial" # For Bluetooth instead: # connection_type = "ble" # ble_device_name = "MeshCore-XXXX" # or ble_address = "XX:XX:XX:XX:XX:XX" [serial] ports = ["/dev/ttyACM0"] # Linux: /dev/ttyACM0 or /dev/ttyUSB0 · macOS: /dev/cu.usbmodem… · check: ls /dev/tty* [[broker]] name = "meshcore-asia" enabled = true server = "mqtt.meshcore.asia" port = 443 transport = "websockets" websocket_path = "/" keepalive = 60 qos = 0 retain = false # MeshCore Asia does not want decrypted message content – leave include_decoded off. [broker.tls] enabled = true verify = true [broker.auth] method = "token" audience = "mqtt.meshcore.asia"